How to Assemble a Washer Dryer Stacking Kit

If you're short on space in your laundry area, a washer dryer stacking kit can be a game-changer. This kit allows you to stack your dryer on top of your washing machine, saving valuable floor space. In this guide, we'll walk you through the steps to assemble your stacking kit, ensuring a secure and stable setup.

Tools and Materials Needed:

Washer dryer stacking kit

Screwdriver (Phillips head)

Measuring tape

Spirit level

Step stool or ladder

Protective gloves (optional)

Preparing to assemble your stacking kit 

Unplug the appliances: Before you begin, ensure both your washing machine and dryer are unplugged from the power source.

Clean the area: Make sure the surface of your washing machine is clean and dry. This helps ensure a secure fit for the stacking kit.

Assemble the Stacking Kit

Read the manual: Familiarise yourself with the instructions provided in the stacking kit manual. 

Lay out the parts: Spread out all the components of the stacking kit to ensure you have everything you need.

Install the Brackets

Position the brackets: Place the stacking kit brackets on the top corners of your washing machine. These brackets are designed to fit snugly over the corners, ensuring stability.

Secure the brackets: Use the screws provided in the kit to fasten the brackets to the washing machine. Tighten the screws using a Phillips head screwdriver until the brackets are firmly in place.

Place the Anti-Slip Mat: Most stacking kits include an anti-slip mat to prevent the dryer from shifting. Place this mat on top of the washing machine, aligning it with the edges.

Ensure stability: Make sure the mat lies flat and covers the entire surface area where the dryer will sit.

Stack the dryer: With the help of another person, carefully lift the dryer onto the washing machine. Position it so that it sits evenly on the anti-slip mat.

Align with brackets: Ensure the dryer feet are positioned within the brackets installed earlier. This alignment is crucial for stability.

Secure the dryer: Some stacking kits include additional straps or fasteners to further secure the dryer. Follow the instructions in the manual to attach these, ensuring the dryer is firmly held in place. 

Check the Setup

Use a spirit level: Place a spirit level on top of the dryer to check that it is level. Adjust as necessary to achieve a stable and level setup.

Double-check all screws and fasteners: Ensure everything is tight and secure. This prevents any movement during operation. 

Reconnect and Test

Plug in the appliances: Reconnect both the washing machine and dryer to the power source.

Run a test cycle: Run a short cycle on both appliances to ensure they operate smoothly without excessive vibration or movement. 

By following these steps, you can efficiently assemble your washer dryer stacking kit, maximising your laundry space and ensuring a secure setup. Always refer to the specific instructions provided with your kit for the best results.